Gude Expert Net Control 2302, Руководство пользователя

Страница: 70 / 88

70
Expert Net Control 2302 © 2021 GUDE Systems GmbH
Specifications
port enters cmd group "port"
port {port_num} state set {OFF=0|ON=1} sets port to new state
port {port_num} state show shows port state
port all state set "{port_list}" {OFF=0|ON=1}
sets several ports in one cmd - e.g. port all state
set "1,3,5" 1
port all state {MODE0=0|MODE1=1|MODE2=2}
show
shows all port states in 3 different view modes 4
port all set {OFF=0|ON=1|OFF_REV=2|
ON_REV=3}
switch all ports on/off forward or reverse
port restart all set {REINIT=0|
OFF_REV_REINIT=1,OFF_REINIT=2}
reinit coldstart sequence (optional first all off)
port {port_num} reset start reset sequence for port
port {port_num} toggle toggles port
port {port_num} batch set {OFF=0|ON=1} wait
{num_secs} {OFF=0|ON=1}
starts batch mode for port
port {port_num} batch cancel cancels batch mode
port {port_num} label set "{name}" sets port label name
port {port_num} label show shows port label name
port {port_num} initstate coldstart set {OFF=0|
ON=1|REMEMBER=2}
sets port coldstart initialization
port {port_num} initstate coldstart show shows port coldstart initialization
port {port_num} initstate delay set {num} sets port init delay
port {port_num} initstate delay show shows port init delay
port {port_num} repowerdelay set {num} sets port repower delay
port {port_num} repowerdelay show shows port repower delay
port {port_num} resettime set {num} sets port reset duration
port {port_num} resettime show shows port reset duration
port {port_num} watchdog enabled set {OFF=0|
ON=1}
sets port watchdog to on/off
port {port_num} watchdog enabled show shows port watchdog state
port {port_num} watchdog mode set {OFF=0|
PORT_RESET=1|IP_MS=2|IP_MS_INV=3}
sets port watchdog mode
port {port_num} watchdog mode show shows port watchdog mode
port {port_num} watchdog type set {WD_ICMP=0|
WD_TCP=1}
sets port watchdog type
port {port_num} watchdog type show shows port watchdog type
port {port_num} watchdog link down set {OFF=0|
ON=1}
sets if watchdog active when eth link down
port {port_num} watchdog link down show shows if watchdog active when eth link down
port {port_num} watchdog host set "{dns_name}" sets port watchdog host target
port {port_num} watchdog host show
shows port watchdog host target
port {port_num} watchdog port set {ip_port} sets port watchdog TCP port
port {port_num} watchdog port show shows port watchdog TCP port
port {port_num} watchdog pinginterval set {num} sets port watchdog ping interval
port {port_num} watchdog pinginterval show shows port watchdog ping interval
port {port_num} watchdog pingretries set {num} sets port watchdog ping retries
port {port_num} watchdog pingretries show shows port watchdog ping retries
port {port_num} watchdog retrybooting set
{OFF=0|ON=1}
sets port watchdog retry booting to on/off
port {port_num} watchdog retrybooting show shows port watchdog retry booting state
port {port_num} watchdog bootretries set {num} sets port watchdog retry boot timeout
port {port_num} watchdog bootretries show hows port watchdog retry boot timeout
radius enters cmd group "radius"
radius {PRIMARY=0|SECONDARY=1} enabled
set <off=0/on=1>
enables radius client
radius {PRIMARY=0|SECONDARY=1} enabled
show
show if radius client enabled
radius {PRIMARY=0|SECONDARY=1} server set
"<dns_name>"
sets radius server address
radius {PRIMARY=0|SECONDARY=1} server
show
shows radius server address
radius {PRIMARY=0|SECONDARY=1} password
set "{passwd}"
sets radius server shared secret
radius {PRIMARY=0|SECONDARY=1} password
hash set "{passwd}"
sets radius server crypted shared secret
radius {PRIMARY=0|SECONDARY=1} auth
timeout set {num_secs}
sets server request timeout
radius {PRIMARY=0|SECONDARY=1} auth
timeout show
shows server request timeout
radius {PRIMARY=0|SECONDARY=1} retries set
{0..99}
sets server number of retries
radius {PRIMARY=0|SECONDARY=1} retries
show
shows server number of retries
radius chap enabled set <off=0/on=1> enables CHAP
radius chap enabled show shows if CHAP is enabled
radius message auth set <off=0/on=1> enables request message authentication