Gude 85057 GAB 5A, Руководство по эксплуатации

Страница: 10 / 42

necessarily be followed. Always wear protective glasses
and gloves for this work.
Step 2
First, connect the battery terminal that is not connected
to the chassis. Connect the second terminal to the body
in a sufficient distance from the battery and petrol feed
line. The charger can then be plugged.
If you intend to charge the battery outside the vehicle,
make sure the right polarity is provided for the
connection:
red terminal: positive pole black terminal:
negative pole.
Step 3
•
Now plug the feeder cable.
•
Using the “MODE“ button on the control panel,
select the expected charge rate intensity.
Pressed 1 time:
1.2Ah-14Ah/DC14.4V/0.9A
Pressed 2 times: 14Ah-120Ah/DC14.4V/3.2A
Pressed 3 times: 14Ah-120Ah/DC14.7V/3.2A
Pressed 4 times: STOP
Pressed 5 times: RESTART
Step 4
After charging, the charger automatically switches to the
charging maintaining mode. The charger may be
disconnected at any time in this mode.
Operating instructions
When not connected, the charging tongs are not under
voltage. The charger switches on only after being
connected to a 12 V battery and selecting the charging
mode.
Unlike a charger, this inverted charger works with a low
charge rate substation with such efficiency that the
charged battery gets hardly ever damaged. This results in
extending the charging time. High-rate charging is not
possible.
The given charging programme automatically selects the
appropriate charge rate for the battery just being charged.
Battery size
(Ah) Selected
charging mode Time (hours)
2 2
8
8
14 3
20 5
60 15
100 25
120
27
*the given values are just of indication nature and may
therefore differ.
Marking
Product safety:
Product corresponds to
appropriate EU standards
Protection class II
Prohibitions:
No pulling the plug!
Protect against rain and
moisture!
Warning:
Warning/caution
Warning against dangerous
voltage
Appliance to be put into
operation in dry places!
Commands:
General command symbol
Please read the Operating
Instructions before using
the appliance
Environment protection:
Dispose waste professionally
so as not to harm the
environment.
Packing cardboard material
may be delivered to
collecting centres for
recycling.
Faulty and/or disposed electric
or electronic appliances must
be taken to appropriate
collection centres.
Package:
Protect against moisture This side up
Interseroh-Recycling
10