Gude 55064, Перевод оригинальной инструкции

Страница: 18 / 136

GB
Other Hazards
Hazard Description Protective Action Residual Hazards
Breakage in operation The band may break in
operation. Always wear protection goggles
when working with the unit.
Thrown away articles and
splashes The band or mechanical
particles may wound your eyes
in the course of cutting job. Always wear protection
goggles.
Disposal
Disposal instructions are given by pictographs on the unit or
packaging. For meaning of individual symbols refer to chapter
“Symbols on Unit”.
Operator Requirements
The operator should read the instruction manual carefully
before using the unit.
Qualification
No special qualification is required for use of the unit except
for detailed direction by a professional.
Minimum Age
Only persons above 16 years of age are allowed to work with
the unit. .
Exempted from the provision is the use of the juvenile
trainees if they work in the course of their professional
training with an aim to obtain the skill under a trainer
supervision.
Training
Use of the unit requires adequate lesson by a professional or
the use of the manual only. Special training is not required.
Technical Data
Supply connection
230 V~50 HZ
Motor output
740 W
Motor speed
1400 min-1.
Ø Saw band pulley
315 mm
Speed
370+800 m/min.
Table size
400 x 480 mm
Max. headway
155 mm
Max. stroke width
305 mm
Table setting range
0-45°
Saw band dimensions
2240 x 12,7 x 0,50 mm
Band teeth system
4 Zähne pro Zoll
Ø exhaust
100 mm
Base height
530 mm
Total height
1715 mm
Acoustic output level
measured
guaranteed
L
WA
81 dB
L
WA
101 dB
Weight ca
73 kg
Transportation and Storage
Assembly and Initial Operation
Structural Group 1 Delivery-contained
parts and accessories
Fig. 3
Fig. 1 – Pos. 8/2x
Fig. 1 – Pos. 9/2x
Fig. 1 – Pos. 22/4x
Fig. 1 – Pos. 8/16 x
18