GÜDE EPS 8112-1, Руководство пользователя

Страница: 13 / 16

13
Expert Power Sequencer 8112 © 2021 GUDE Systems GmbH
Operating
e) After the desired time switch to "Off" (for N seconds - N x flashing).
f)
The EPS 8112 is in the switched off status (outside programming mode).
The minimum waiting time when switching on is 2 sec. and the maximum time is 60
sec, even if a different time has been configured. The waiting time when switching off is
always fixed at 3 sec.
Example: All ports set to 10 sec
·
2x switch on and off (programming mode)
·
wait 3 sec. - LED flashes 3x orange
·
switch on - wait 10 sec. - switch off
Set one or more ports to a waiting time
a) Start programming mode
b) To select the Xth port, switch on and off X times.
If you switch several times and wait more than 5 sec. in position "On", the program-
ming mode will be left.
c) Wait 3 sec, the LED flashes green X times.
d) If one does nothing for 5 sec, then one is out of the programming mode.
e) To set the time, switch to "On", the LED flashes red every second.
f)
Switch off after the desired time (for N seconds - N x flashing).
g) Now the X+1th port is selected, switching on continues at b), waiting 3 sec. contin-
ues at c).
The minimum waiting time when switching on is 2 sec. and the maximum time is 60
sec, even if a different time has been configured. The waiting time when switching off is
always fixed at 3 sec.
Example: Set the time of port 2 to 7 sec, port 3 to 8 sec. and port 5 to 10 sec.
·
2x on and off (programming mode)
·
switch 2x on-off - selects port 2
·
wait 3 sec. - LED flashes 2x green
·
switch on - wait 7 sec. - switch off
·
wait 3 sec. - LED flashes 3x green
·
switch on - wait 8 sec. - switch off
·
5x switch on - off - selects port 5
·
wait 3 sec. - LED flashes 5x green
·
switch on - wait 10 sec. - switch off
·
Wait 5 sec, EPS 8112 exits programming mode