Guardian EMC3B, Руководство пользователя

Страница: 5 / 12

1
Mains
Fail
Solenoid
Output
Photo
Output
Photo
Input
A/Vis
Output
Fire Signal 1
Fire Signal 2
IP00 IP00 IP00 IP00 IP00 IP00 IP00 IP00 IP00 IP00 IP00 IP00 IP00
Volt-free
15 6 1 3 2 4 5 7 8 9 10 11 12 13 14 25 20 16 17 18 19 21 22 23 24
Terminal Layout
Terminal Connection Details
Power Connections
Connect a 1ph/230VAC (2A) supply to terminals `L`, `N` & `E`.
Control Connections
A volt-free signal will be present if the mains supply is lost.
(i.e. a Normally Open contact that closes).
A 24VDC output will be present to fire the solenoid.
This is only active if the mains supply has failed and for 1 second before the panel is reset.
A 1 second pulse before resetting is necessary to ensure the fire shutter will always close
(i.e. in case of a faulty supply to the starter, etc.)
A 24VDC output will be present to drive a Slave Audio/Visual Unit, if required.
230VAC/1ph/Neutral/Earth
Mains Supply (2A)
L E N
Volt-free
Mains Fail
Output
Com
N/C N/O
24VDC
Audio/
Visual
Output
Volt-free
Photocell
Input
Volt-free
Photocell
Output
24VDC
Solenoid
Output
Smoke
/Heat
Detector
Input
Fit Link
for
Volt-free
Fire
Signal
Fit Link
for
Volt-free
Fire
Signal
Fire Signal Fire Signal
Door Close
Relay
Output
Volt-free
Fire Signal 2
Connections
Fire Signal 1
Connections
24VDC
Fire Signal
1
3
5
4
Mains
Fail
Sol
A/Vis
2
4
6
IP00
IP00
IP00