Guardian 55 ES, Руководство оператора

Страница: 16 / 34

16
standard with a 2 inch threaded cap. A slot in the chassis aluminum end panel allows for visual
reference to volume remaining.
Note: Use only products specifically intended for ULV
use as outlined on the product label.
A “ R eady- T o- U se” 2.5 gallon jug may be used in place of the
supplied tank. Included with this machine is a customized 63mm
cap for use with 2.5 gallon jugs. This cap is fitted with a draw tube
and compression style coupling and vent. Simply replace the
existing cap of your “RTU” jug with the new Guardian cap and
place the jug in the same location as standard tank and strap
securely in place. Auxiliary holes have been added to allow the
end panel of the “tank basket” to be moved inward to stabilize
the position of an RTU jug. Finally, connect the line from the
orifice assembly to the bulkhead connector of the Guardian RTU
cap.
ATOMIZATION NOZZLE
The atomization nozzle is designed to efficiently and effectively
atomize various oil and water based formulations to micron
diameter droplet sizes as outlined on the specific formulation
label. Keep the nozzle clean and free from dings and dents to
maintain perfect concentric alignment of the air and fluid ports.
Formulation is fed through the rear of the nozzle body by way of
the ball valve. Compressed air is introduced into the nozzle from
the bottom of the aluminum nozzle body. The nozzle swivels 360°
horizontally and approximately 300° vertically to position the
nozzle at the desired attitude. The most common nozzle position
is pointed directly toward the back with respect to the travel
direction of a vehicle with an upward 45° degree attitude.