Guardian 42103, Инструкция по эксплуатации

Страница: 2 / 57

2
Important Notes

Tool tethers are suitable only for hand
tools weighing the specified weight
rating or less that have manufacturer’s
intended attachment features, such as
Guardian attachment point products, rings
or holes, that can be properly secured
with the various tether end types.

This product is intended for use
by personnel who are trained
and knowledgeable regarding
working with hand tools at height
and/or near machinery.

Inspect before each use for
damage and proper function:
1. Check all hardware for abrasion,
deformity, cuts and sharp edges.
2. Check for tears, cuts, fraying, abrasion,
discoloration, burns, holes, mold,
unsplicing, pulled or broken stitches,
or other signs of wear or damage.
3. For coil style products: cracks, slits,
stress risers or lack of retraction
memory in coil material.
4. Do not use and always quarantine if
any of the above apply or if damaged
or not functioning correctly.

Tool tethers should only be attached
to anchors (i.e. belts and harnesses)
that have manufacturer’s intended
attachment specifications.

Tool tethers are not intended
for use on the wrist.
Applicable Safety Standards
Meets or exceeds:

ANSI / ISEA 121-2018
Safety Information

WARNING! Do not use near
moving parts, mechanisms, running
machinery or rotating equipment.

May contain electrically
conductive materials.

Do not alter product in any way
from its original state.

Use only with tools that are
specifically designed for tethering,
or by using compatible Guardian
brand attachment products.
English