Guardian 42102, Инструкция по эксплуатации

Страница: 4 / 60

4
English
BELT ADAPTER
D-RING
Parts # 42102
Important Notes

Belt Adapter D-Rings are suitable
only for hand tools weighing 2.72 kg
(6 lbs) or less and tool tethers with
a length of 152 cm (5 ft) or less.

This product is intended for use
by personnel who are trained
and knowledgeable regarding
working with hand tools at height
and/or near machinery.

Inspect before each use for
damage and proper function:
1. Check all hardware for abrasion,
deformity, cuts and sharp edges.
2. Check for tears, cuts, fraying, abrasion,
discoloration, burns, holes, mold,
unsplicing, pulled or broken stitches,
or other signs of wear or damage.
3. Do not use and always quarantine if
any of the above apply or if damaged
or not functioning correctly.

Belt Adapter D-Rings should only be
attached to anchors (i.e. belts and
harnesses) that have manufacturer’s
intended attachment specifications.

Use with one tool per Belt
Adapter D-Ring only.

Do not throw instructions away.

Read and understand instructions
before using this equipment.
Instruction
Manual
Applicable Safety Standards
Meets or exceeds:

ANSI / ISEA 121-2018
Safety Information

WARNING! Do not use near
moving parts, mechanisms, running
machinery or rotating equipment.

May contain electrically
conductive materials.

Do not alter product in any way
from its original state.

Use only with tools that are
specifically designed for tethering,
or by using appropriate Guardian
brand attachment products.
Installation
See image on page 3

Step 1
Thread Belt Adaptor D-Rings
onto belt* as shown.
*Comfort Fit Utility Tool Belt (#42100) sold separately