Guardian 36100, Инструкция по эксплуатации

Страница: 2 / 12

2
Product Specific Applications
May be used in Work Positioning
applications. Work Positioning systems
allow a worker to be supported while in
suspension and work freely with both hands.
Structure must withstand loads applied in the
directions permitted by the system of at least
3,000 lbs. This device is designed to support the
user when working at height and when needing
a hands free environment. A fall arrest backup
must be used.
D-ring: Side (pairs only)
For All Product Applications

Worker weight capacity range (including
all clothing, tools, and equipment)
is OSHA 130-420 lbs. ANSI 130-310 lbs.

Anchorage point must be able to hold
a load of 5,000lbs, or meet OSHA
requirements for twice the anticipated
load (certified by a Qualified Person)
and that it is fixed, preventing the device
anchorage from moving while in use.
Anchorage points which may come into
contact with the rope lanyard must be free from
sharp burrs, edges, abrasive surface and/or any
other hazards which may cause damage to the
rope constituent.
The job site Competent Person (CP) must
ensure that there are sufficiently strong and
accessible anchorage points in the working
environment. The user should be aware at
all times of which attachment points to use;
if not immediate obvious they must seek
confirmation from the CP. Always ensure that
the means of attachment to the anchorage is
secure before beginning work.
Applicable Safety Standards
Meets or exceeds:

OSHA 1926.502

OSHA 1910.140

ANSI Z359.3
Competent Person Definition
The job site safety supervisor, referred to in this
manual as the Competent Person (CP), must be
a highly trained and experienced person who
is assigned by the employer to be responsible
for all elements of the fall safety program; this
includes, but is not limited to, program regulation,
management, and application. The CP must be
proficient in identifying existing and predictable
fall hazards, and must have the authority to stop
work to eliminate hazards or otherwise promote
safe and compliant work practices.