background image

Guardian Telecom Inc. 

 

Installation and Operation 

Model AS12 

 

Page 3 

 

 

 

Overview 

Automatic Amplifier Switch 

The AS12 Automatic Amplifier Switch continuously monitors the outputs of paging amplifiers to 
detect failures.  If it detects a problem it will switch the defective amplifier out of the circuit and 
activate the standby amplifier.  The appliance is capable of simultaneously monitoring four amplifiers 
plus a standby, and provides visual indication of amplifier status. 

As part of an integrated industrial emergency/communications system, the AS12 ensures 
uninterrupted communication in the event of an amplifier failure. 

The AS12 Automatic Amplifier Switch is one component in Guardian Telecom's full line of paging 
system products, which also includes alarm tone generators and distribution amplifiers. 

 

Features 

  Simultaneously monitors up to four paging amplifiers and one standby amplifier 

  Instantly detects and indicates amplifier failure 

  Automatically transfers output from a failed amplifier to the standby amplifier 

  Visually indicates amplifier status 

  Maintains historical visual indicators 

  Automatically resets amplifiers to normal when a fault is corrected 

 

Содержание AS12













Отзывы: