© 2021. Guardian Safety Pendants. All rights reserved
© 2021. Guardian Safety Pendants. All rights reserved
Useful Codes
LED Indicators
By sending the following ‘codes’ in a text message to the MediFone, you can
make the following changes or receive important information.
Note: You must use the PASSWORD before sending any code, which is
123456
.
For example, send the text code
123456F
to locate the device.
CODE
RESPONSE
F
KLxxx
L5,xx:xx
Q2,x
Q3,x
LOCATING
DEVICE
FALL DETECTION
DAILY ALARM
WHITELISTING
AUTO-ANSWER
Click the link on the incoming text to open Google Maps and
see the user’s location. An example return text will read:
GPS OK! Date: dd/mm/yy Time: (24 hour time)Speed:
km/h
Battery Level: % maps.google.com/maps?q=xxx
GSM Init Now
SOS
Fall Alert
Battery Symbol
The Contacts List
This means that the Pendant is beginning it’s boot up
sequence. Once the percentage shown at the bottom of the
screen reaches 100% it will proceed to the home screen
This means that the SOS button has been pressed and the
MediFone is getting ready to call the emergency contacts.
This means that the MediFone has detected a fall and is
getting ready to call the emergency contacts.
This shows the battery is charging. When the symbol is full
and not flashing the battery has been fully charged.
This shows the emergency contacts that are programmed
into the MediFone. You can scroll through these by
pressing the side buttons. Press the SOS button to then
call the selected contact as a normal phone call.
see page 4 for more details.
The default is that Fall Detection is on and set at sensitivity
050.
(KL001 = least sensitive, KL255 = most sensitive)
Sensitivity can be adjusted by replacing
xxx
with any
number from 001 – 255.
For example, text:
KL060
To turn off Fall Detection, text:
KL000
Use this code to set a daily alarm.
Replace
xx:xx
with a time of day using 24 hour time.
For example, for the alarm to be at 9:30am, text:
L5,09:30
For the alarm to be at 9:30pm, text:
L5,21:30
Whitelisting means only the emergency contacts can call the
MediFone.
Replacing
x
with
0
turns on whitelist (only contacts can call);
1
turns off whitelist (anyone can call)
For example, to allow anyone to call the MediFone
(whitelisting off), text:
Q2,1
Auto answer means the MediFone will ring once when called
and then automatically answer.
Replacing
x
with
0
turns on auto answer (which is the default
setting);
1
turns off auto answer.
If auto answer is switched off, then the user must press
the SOS Button to answer the call
Battery Percentage
Phone Network
and Reception
GPS Active
Current Date
Current Time
SCREEN
WHAT IT MEANS
Page
8
Page
5