background image

Introduction

Thank you for purchasing a Guardian Fall
Protection Rope Anchor. This manual must
be read and understood in its entirety, and
used as part of an employee training
program as required by OSHA or any
applicable state agency.

This and any other included instructions
must be made available to the user of the
equipment. The user must understand how
to safely and effectively use the Rope
Anchor, and all fall safety equipment used
in combination with the Rope Anchor.

User Information

Date of First Use:

Serial #:

Trainer:

User:

Applicable Safety Standards

When used according to instruction specifications, this product meets or exceeds all applicable OSHA 1926
Subpart M, OSHA 1910, ANSI Z359.1-2007, and ANSI A10.32-2012 standards for fall protection. Applicable
standards and regulations depend on the type of work being done, and also might include state-specific
regulations. Consult regulatory agencies for more information on personal fall arrest systems and associated
components.

Worker Classifications

!

CAUTION

Understand the following definitions of those who
work near or who may be exposed to fall hazards.

Qualified Person:

 A person with an accredited degree or certification, and with extensive experience or

sufficient professional standing, who is considered proficient in planning and reviewing the conformity of fall
protection and rescue systems.

Competent Person:

 A highly trained and experienced person who is ASSIGNED BY THE EMPLOYER to be

responsible for all elements of a fall safety program, including, but not limited to, its regulation, management,
and application. A person who is proficient in identifying existing and predictable fall hazards, and who has
the authority to stop work in order to eliminate hazards.

Authorized Person:

 A person who is assigned by their employer to work around or be subject to potential or

existing fall hazards.

It is the responsibility of a Qualified or Competent person to supervise the job site and ensure all
applicable safety regulations are complied with.

 G

uar

di

an

 F

al

l P

ro

te

ct

io

1

Product Specific Applications

Personal Fall Arrest:

 Rope Anchor may be used to support a MAXIMUM 1 PFAS for use in Fall

Arrest applications. Structure must withstand loads applied in the directions permitted by the
system of at least 5,000 lbs. Maximum free fall is 6‘. Applicable D-ring: Dorsal.

!

WARNING

Use of equipment in unintended applications may result in serious

injury or death. Maximum 1 attachment per connection point.

Содержание 01300









Отзывы: