Guangzhou Yingfeng Lighting Equipment MHY10803, Руководство пользователя

Страница: 4 / 10

Guangzhou Yingfeng Lighting Equipment Co.,Ltd www.yf-light.com
3
 The intelligent fan control, the fan start running when there is LED light up, and fan stop running
after 1 minutes of the LED lights closed.
2 、
Safety instruction
All persons associated with this device’s installation and maintenance must be ：
—Have a technician qualification
—Following the requirements of this user manual.
Note: Keep the device away from water, moisture, disconnect the main power before opening the
shell.Operating carefully. Danger high voltage, be careful of electric shock! This device everything is
normal when leave the factory. To ensure proper and safe operation of these conditions , the users must
comply with the instructions of the following security requirements and considerations
 The manufacturer will not be responsible to the accidents losses caused by the improper operation
and change the unit personally without permission.
 Don’t connected the power cable to other cables. Pay attention to make sure the power supply voltage
matches the singed voltage on the device.
 Ensure connect the power plug to the socket. Mare sure the power switch is on the OFF position
before connect the device to the main power.
 Make sure the power cable should not be broken and cut or damaged by sharp objects. Scheduled
check the device and power cable.
 Please disconnect the main power when the device is not being used or before cleaning of it.To
disconnect the power by pull the power plug but not by dragging the power cable
 The protection level of this device is I, so please connect the yellow /green lines grounded. Line
connection, maintenance and services must be carried out by specialized technicians.
 Should not connected this device to the DMX dimmer packs
 Do not continuously turn the device ON and OFF in a short interval of time.

Attention! Be careful with your eyes! Avoid staring blankly forward the light source.
3
、
Operation instructions
 This device is the LED washing moving head light, used to create decorative effects.
 Do not run the device at once after it undergo a big temperature changes( such as undergo transport),
because the thermal expansion will damage the device. Please wait until the device reach the normal
room temperature to run it.
 Pay attention to shockproof. Avoid strong collision during installation.
 Do not lift the device by lift the lamp head, as this will damaged the mechanical of the device.Use the