2
、
TP Installation
Fix
Screw B (special)
onto back of TP, see picture below:
NOTE: a. Normally two will be enough, correspondent with that of the
Installation Box
b. When
Screw B
is fixed, there’s will still be some screw thread showing at the end of B,
that’s NORMAL,
NO SCREWING ON WITH FORCE
.
3
、
Installation to the Wall
Aim
Screw B (special)
at
Connection Pole
, PUSH INSIDE the TP and the installation is done.
Note: Before you push the TP into the Installation Box, the latter should have been fixed in the
wall already.
