Guangxi Liuzhou Wuling Motors LJ465Q-1ANE1 Скачать руководство пользователя страница 24 | Manualshive

Страница: 24 / 54

Guangxi Liuzhou Wuling Motors LJ465Q-1ANE1 Скачать руководство пользователя страница 24

indicator comes on, showing no engine oil pressure

；

turn the switch to “START”, the petrol

engine is started at idle speed, at that time, the engine oil pressure indicator automatically goes

off, showing normal engine oil pressure. If the engine oil pressure indicator doesn’t go off,

showing the engine oil pressure in the petrol engine lubrication system is abnormal, first check

engine oil amount of the petrol engine is sufficient.

Turning the switch to “ON”, the engine oil pressure indicator goes off, but the engine oil

pressure switch is connected to the bonding iron of the body at idle, the engine oil pressure

switch cuts off the bonding iron of the body, showing the engine oil pressure switch works

normally. At that time, check the indicator and related circuit have malfunction.

Section 2 Maintenance of the Cooling System

The cooling system is one of essential conditions to guarantee normal work of the petrol

engine, therefore, it’ s necessary to guarantee sufficient coolant inside the petrol engine, perform

inspection before running the vehicle every time, replenish in time if insufficient.

«
...
22
23
24
25
26
...
»

Содержание LJ465Q-1ANE1























































Отзывы:

Нет отзывов