or for 30 hours according to the running-in standard on the test-bed.
The following should be done to run-in the petrol engine in the vehicle:
1. Check
Check engine oil, coolant, gasoline, battery electrolyte for sufficiency, replenish and repair
if insufficient amount and leakage.
2. Road surface
Vehicles should run on the cement or asphalt road surface, do not attempt to run on other
road surfaces, especially on sand & mud roads.
3. Running-in standard
The petrol engine should be run-in on the vehicle, follow the running-in standard of the
petrol engine shown the following table, it is not allowed to be higher than every gear speed
shown in the following table. If there exists between the vehicle running-in standard and this
standard, this standard should be followed.