GTV, ul. Przejazdowa 21, 05-800 Pruszków; tel. 22 444 75 00; fax 22 444 75 01; www.gtv.com.pl
EN
Instruction
Welcome to use AE-CM3M00-00 Microwave Sensor!
The product is a new saving-energy product; it adopts microwave sensor mould with high-frequency electro-magnetic wave
(5.8GHz) and integrated circuit. It gathers automatism, convenience, safety, saving-energy and practical functions. The wide
detection field depends on detectors. It works by receiving human motion. When one enters the detection field, it can start the
load at once and identify automatically day and night. Its installation is very convenient and its using is very wide. Detection is
possible to go through doors, panes of glass or thin walls.
SPECIFICATION:
Power Sourcing: 220 -240V/AC
Detection Range: 360°
Power Frequency: 50/60Hz
Detection Distance: 1-8m (radius), adjustable
Ambient Light: <3-2000LUX (adjustable)
HF System: 5.8GHz CW radar, ISM band
Time Delay:
Min.10sec±3sec
Transmission Power: <0.2mW
Max.12min±1min
Installing Height: 2-6m
Rated Load:
2000W
Power Consumption: approx 0.9W
1000W
Detection Motion Speed: 0.6-1.5m/s
FUNCTION:
• Can identify day and night: It can work in the daytime and at night when it is adjusted on the “sun” position (max). It can
work in the ambient light less than 3LUX when it is adjusted on the “3” position (min). As for the adjustment pattern, please
refer to the testing pattern.
• SENS adjustable: It can be adjusted according to using location. The detection distance of low sensitivity could be only 2m
and high sensitivity could be 16m which fits for large room.
• Time-Delay is added continually: When it receives the second induction signals within the first induction, it will restart to
time from the moment.
• Time–Delay is adjustable. It can be set according to the consumer’s desire. The minimum time is 10sec±3sec. The maximum
is 12min±1min.
NOTE: the high-frequency output of the HF sensor is
<0.2Mw- that is just one 5000th of the transmission
power of a mobile phone or the output of a microwave
oven, the baby can't touch it.
INSTALLATION:
(see the diagram)
• Please move the upper cover with anti-clockwise whirl as per the diagram on the right.
• Connect the power and the load according to the connection-wire diagram.
• Fix the bottom on the selected position with the inflated screw.
• Install back the upper cover on the sensor, then you could switch on the power and test it.
MICROWAVE SENSOR
AE-CM3M00-00
