DotSurfer
3. WINDOWS CE 3.0 AND POCKET PC 2002
3.1 INSTALLATION
In addition to your iPAQ, you need the following:
- USB cradle
- Desktop or laptop PC
- PC card expansion pack
- Microsoft ActiveSync 3.1 or higher
Note: Do NOT insert the DotSurfer modem card in your iPAQ until the software
is installed.
a.
Synchronize your iPAQ and computer by inserting the Microsoft ActiveSync 3.1 CD into your
computer. For instructions on this procedure, please refer to the iPAQ user manual.
b.
Once the computer and the iPAQ are synchronized, you should see the screen shown below
on your PC.
c.
Insert the DotSurfer installation CD into your PC. Click
Cancel
on the following screen.
d.
Click on
Start ->Run
and enter
d:\WinCE\Sa1110\English\setup.exe
. Replace
d:
with the
drive letter for your CD-ROM drive, if necessary.
Note: Replace English with Espanol or Portugues for the specific language that you want
installed.
For example
[CD_Drive]:\Wince\Sa1110
\English\
Setup.exe for English
[CD_Drive]:\Wince\Sa1110
\Espanol\
Setup.exe for Spanish
[CD_Drive]:\Wince\Sa1110
\Portugues\
Setup.exe for Portuguese
e.
Follow the on-screen instructions.
27
