2) LED INDICATORS:
a) RED LED: The red LED blinks when power is present.
b) GREEN LED: The green LED blinks when detection occurs.
NOTE: Both LEDs blink when fault is detected at the loop.
3) TERMINAL BLOCK (PLUGGABLE):
a) OUTPUT RELAY: Relay is ‘dry-contact’ output.
i) TB1-1: Normally open side of output relay.
ii) TB1-2: Common side of output relay.
iii) TB1-3: Normally closed side of output relay.
b) POWER SUPPLY INPUT:
i) TB1-4: 8-26 Vac/Vdc positive input.
ii) TB1-5: 8-26 Vac/Vdc negative input.
Relay output:
Normally Open
Relay output:
Common
Relay output:
Normally Close
Power supply input:
8-26 Vac/dc
Loop: wire use for loop
should be continuous with
no splice. Wire pair leaving
the loop should be twisted.
DIP SWITCHS
DIP 1: PRESENCE TIMER
DIP 2: SAFE/SECURE
DIP 3: ENTER/LEAVE
DIP 4: CONT/PULSE
DIP 5: INST/DELAY
DIP 6: SENS 0
DIP 7: SENS 1
DIP 8: SENS 2
DIP 9: FREQ 0
DIP 10: FREQ 1
LED LIGHTS
LED RED: POWER
LED GRN: DETECT
NO
COM
NC
V+
V–
LOOP
LOOP
TERMINALS
TB1-1: NO
TB1-2: COM
TB1-3: NC
TB1-4: Power in +
TB1-5: Power in –
TB1-6: LOOP
TB1-7: LOOP