manualshive.com logo in svg

GTK SMA7215, Руководство по эксплуатации и обслуживанию

Поделиться
Скачать
GTK SMA7215 Скачать руководство пользователя страница 17

      17

GLENTEK  Inc.  208 Standard Street, El Segundo, California 90245, U.S.A.  (310) 322-3026

SMA7215 MANUAL

4.3.2 Wire Size and Type:

IMPORTANT:

 To ensure safe operation, Glentek strongly recommends that all wiring

conform to all local and national  codes.

Recommended Wire Size and Type:

• 

Motor Wires:

14AWG, shielded - Standard Version.
12AWG, shielded - High Power Version.

• 

Motor Case Ground:

Same as motor wires, or use metallic conduit.

• 

Main Power:

14AWG, twisted.

• 

Fan Power:

16AWG, twisted.

• 

Signal & Tach Input:

22AWG, twisted-pair, shielded.

• 

Logic Inputs/Outputs:

22AWG, shielded with its return lead.

4.3.3 Connector Size and Type:

4.3.3.1 

The Power Connector - TB1:

All amplifiers are shipped with the right angle AUGAT terminal block mounted as it

power connector . The vertical angle AUGAT terminal block and the PHOENIX connector
are two options one can choose to use for the power connector. The specifications of all
the mentioned connectors are listed as follows:

• 

AUGAT

®

 RDI 

6 Series Tri-Barrier Terminal Blocks

(AUGAT P/N: 6PCR-04) 

- Default

:
- Screw Size/Spacing: 6 (#6-32 on .375" centers).
- Terminal Style: PC (Printed Circuit Pin).
- Terminal Orientation: R (Right Angle).
- Number of Screw Terminals: 04 (4 screw positions).
- Terminal lugs: Thomas & Betts (T&B P/N: A116 for 18awg wire, B19 for 
14awg wire and C133 for 12/10awg wire).

• 

AUGAT

®

 RDI 

6 Series Tri-Barrier Terminal Blocks

(AUGAT P/N: 6PCV-04):

- Screw Size/Spacing: 6 (#6-32 on .375" centers).
- Terminal Style: PC (Printed Circuit Pin).
- Terminal Orientation: V (Vertical Angle).
- Number of Screw Terminals: 04 (4 screw positions).
- Terminal lugs: Thomas & Betts (T&B P/N: A116 for 18awg wire, B19 for 
14awg wire and C133 for 12/10awg wire).

• 

PHOENIX CONTACT, 

COMBICON Headers and Plugs

 with 7.62mm pitch

(HEADER PART# GMSTBA 2,5/4-G-7,62),
(PLUG PART# GMVSTBR 2,5/4-ST-7,62):
- header with side panels, plug-in direction parallel to PCB.
- 4 positions.
- color: green.

Содержание SMA7215



































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды