Gtech CCD001 Скачать руководство пользователя страница 2

2

IMPORTANT SAFEGUARDS:

IMPORTANT:

 To avoid serious personal injury, do not attempt to use this 

product until you read the manual thoroughly and understand it complete-

ly. Save this manual and review frequently for safe operation and instruct-

ing others who may use this tool. Keep this manual for the safety warnings, 

precautions, operations, inspections and maintenance information. Store 

this manual and the receipt in a safe and dry place for future reference. 

WARNING:

 

The warnings and precautions discussed in this manual cannot 

cover all possible conditions and situations that may occur. Please be aware of the 
potential hazards, and take all necessary precautions to avoid risk of injuries. 

  Work area:

• Keep the work area clean and well 

lit. Cluttered benches and dark areas 

increase the risk of accidents.

• Do not operate the tool in explosive 

atmospheres, such as in the presence 

of flammable liquids, gases or dust. The 

tool could create a spark which may 

ignite flammable liquids, gases or dust.

• Keep bystanders, children, and others 

away while operating the tool. Distrac­

tions could result in improper use and 

cause injury.

• Always Keep proper footing and 

balance. Proper footing and balance 

enable better control of the tool in 

unexpected situations.

• Do not use on a ladder or unstable 

supports. Stable footing on a solid 

surface enables better control of the tool 

in unexpected situations. 

  Personal safety:

• Always wear eye protection. Operator 

and others in the work area should 

always wear ANSI­Z87 .1 approved 

safety goggle with side shields. Eye 

protection is used to guard against 

flying debris, which may cause severe 

eye injury. 

• Always hearing protection when using 

the tool. Prolonged exposure to high 

intensity noise may cause hearing loss. 

• Dress properly. Do not wear loose 

clothing or jewellery. Keep your hair, 

clothing, and gloves away from moving 

parts. Loose clothes, jewellery or long 

hair can be caught in moving parts.

• Stay alert. Do not use tool while tired or 

under the influence of drugs, alcohol, 

or medication. A moment of inattention 

while operating the tool may cause 

serious injury.

• Avoid prolonged use. The tool’s 

repetitive motion and vibration can 

cause harm to your hands or arms. The 

user can use gloves for extra cushion, 

take frequent breaks and limit daily use 

to prevent this issue.

• This tool vibrates with use. Continuous 

operation can be harmful to your hands 

and arms. Stop using the tool if you 

feel tingling or pain. Resume work after 

recovery. Seek medical advice if serious 

symptoms occur.

• Make sure there are no hidden electrical 

cables, gas pipes, etc. while working 

on the work piece. These hazards could 

harm the user if damaged while using 

this tool.

• Wash hands after handling this product 

or its power cord. They may contain 

chemi cals known to the State of 

California to cause cancer and birth 

defects or other reproductive harm. 

4614_Drill_manual_aw.indd   2

4614_Drill_manual_aw.indd   2

28/10/2020   16:33

28/10/2020   16:33

Содержание CCD001



















Отзывы: