11
WARNING:
Allow battery to cool down before charging if the battery is hot after continuous use.
BATTERY
All batteries wear out over time due to normal wear and tear. Do not attempt to disassemble and
repair the battery, as this could cause serious burns especially when wearing rings and jewellery.
For the longest possible battery life, we suggest the following:
• Remove the battery from the charger once fully charged.
• Store the battery away from moisture and at a temperature below 80°F.
• Store the battery with at least a 30% 50% charge.
• If a battery has been stored for six months or more, charge the battery as normal.
Attaching the belt clip
The belt clip (8) may be installed on either side
of the tool.
To install, insert the clip into the groove in the
housing and fasten it with screw.
To remove, simple remove the screw and then
remove the belt clip.
4614_Drill_manual_aw.indd 11
4614_Drill_manual_aw.indd 11
28/10/2020 16:33
28/10/2020 16:33