Gtech ATF024, Руководство по эксплуатации, Страница: 6 / 9

11 10
If the suction is low when the bin is empty and filter is clean...
you have a blockage.
Remove the battery & bin from the body
and look through both ends of the tube.
Remove any blockages. The powered floor head can also
get blocked. To check for blockages
thoroughly, remove the brush bar.
(See page 8)
The extension tube and crevice tool can sometimes block too.
Remove the filter by pulling it from the top
of the bin. Tap the dirt from the filter and tip
any dirt from the filter housing. Wash the
filter if necessary. Wash the filter under a tap, squeeze it out
then let it
dry completely before using it.
(You can get more at
www.gtech.co.uk
)
Never put the bin back without
the filter inside. You could damage
the motor.
Cleaning the filter
Press the green buttons and pull to remove
the battery. The battery can be charged on
or off the main unit. If you want to buy a
spare battery go to
www.gtech.co.uk
or call 01905 345 891
Removing the battery