Gtech ATF024, Руководство по эксплуатации, Страница: 5 / 9

8 9
To remove hair from the brush bar, run an
open pair of scissors down the groove to
cut the hair, then pull it out.
Never operate the power floor head without
the brush bar in.
Before you remove the brush bar, you will
need to remove the power floor head from
the extension tube. To do this, gently pull
on the green locking ring. Remove the extension tube from the Power
Floor by pulling gently on the green locking
ring.
Rotate the latch on the side of the powered
floor head and pull out the brush bar.
Removing and cleaning the brush bar
Plug the charger in and connect it to
the battery.
Battery charging
After 4 hours the LEDs turn green
and charging is complete. It is OK to charge for 1 hour for a burst
of cleaning.
When a single green light flashes, recharge
the battery.
4
hours
1
hour
boost