Gtech Accutherm, Руководство по обслуживанию, Страница: 125 / 132

Product Safety & Approvals
Service Manual for Accutherm Ultra Printer D-v
Users should ensure for their own protection that the electrical ground
connections of the power utility, telephone lines and internal metallic water pipe
system, if present, are connected together. This precaution may be particularly
important in rural areas.
Users should not attempt to make such connections themselves, but
should contact the appropriate electric inspection authority, or
electrician as appropriate.
The Load Number (LN) assigned to each terminal device denotes the percentage
of the total load to be connected to a telephone loop which is used by the device,
to prevent overloading. The termination on a loop may consist of any combination
of devices subject only to the requirement that the total of the Load Numbers of all
the devices does not exceed 100.”
Replaceable Batteries
There is a risk of explosion if a battery is replaced by an incorrect type.
Always dispose of used batteries according to the instructions on the
particular type of battery.
Wireless Device Option
The wireless option for the GT1200 uses and approved Azurewave Technologies
mini-PCIe module (Model# AW-NE762H; FCC ID: VQF-RT3090-1T1R)
operating in the 2.4GHz frequency range and is in compliance with the 802.11 b/
g/n communication protocol standards. For a complete list of approved
companies, refer to GTECH part number 55-0115-01E.