GTE ADICOS M-BUSMASTER S, Руководство по эксплуатации

Страница: 15 / 19

13 420-2410-002 EN11
COMISSIONING
ADICOS M-BUSMASTER S
6 Comissioning
WARNING!
The Advanced Discovery System works with electrical current
that can damage the equipment if installed incorrectly.
−
Before starting up the system, verify that all ADICOS components
are properly installed and wired!
− Startup may be performed only by properly trained personnel!
►
Connect the plug-in power supply to the connection socket for power input or a 24 V DC
power supply to the terminal “power input”.
Z
The ADICOS M-BUSMASTER S starts up.
Z
The top red status lED lights up.
Z
If the service-PC is connected, the green and yellow status lEDs
light up to indicate the respective communication.
Setting Up Software Connection
For information on how to establish the connection between the ADICOS
Service Software and the detectors connected to the ADICOS M-BUSMASTER S,
please refer to the ADICOS Service Software operating manual.
7 Operation
The ADICOS M-BUSMASTER S does not have a switch. It is started up by connecting the
included external plug-in power supply to the 230 V supply or by connecting it to a 24V DC
power supply.
Z
The top red status lED is illuminated during operation.
Z
If the service PC is connected, the green and yellow status lEDs
light up to indicate the respective communication.
Switching off device
► Unplug the plug-in power supply from the electrical outlet.