GTE ADICOS HOTSPOT-X0 Interface-X1, Руководство по эксплуатации

Страница: 15 / 18

13 HOTSPOT-X0 Interface-X1 410-2410-011 EN12
COMMISSIONING
6.2 Wiring of the fire detection system
Depending on the system configuration connect the fire detection system to terminals 1 ... 20
of the system connection terminal
(–› Chap. 4.2.3)
.
Also consult
GTE-manual No. 430-2410-001
(ADICOS AAB Operating manual)
and
GTE-manual No. 430-2410-004
(ADICOS AAB-L Operating manual) .
7 Commissioning
DANGER!
ADICOS systems work with electricity that may lead to system damage
and fire in the case of improper installation.
−
Prior to switching on, check that all detectors are properly
mounted and wired!
−
Commissioning may only be performed by qualified
specialist personnel!
DANGER!
The ADICOS HOTSPOT-X0 Interface-X1is subject to the protection principle
and/or the ignition protection type
equipment protection by flameproof
enclosures „d“
.
−
Firmly close enclosure lid before commissioning!
NOTE!
The ADICOS HOTSPOT-X0 Interface-X1 is a passive component. A separate
commissioning is not required.
−
Initialize the ADICOS fire detection system according to the
operating manual of the installed central unit (ADICOS BMZ-30 /
M-Busmaster)!