7
4.3 Lamps installation
1. Disconnect the power, cool down the fixture, and set the Tilt lock-catch on the arm in a horizontal
position.
2. Use a screwdriver to rotate 1/4 circle counter-clockwise to unscrew the four quick bolts on the lamp
’
s
back-cover.
3. Pull the back cover out gently in parallel direction by hands, and pull it in full place to let it drop down
naturally.
4. Let the dot on the sphere of the lamp face to the back and the sphere face to the front, put the lamp
horizontally into the slot on the lamp-holder and make sure that the lamp
’
s metal handle already be in alignment
with the bayonet edge of the holder. Then press the metal legs at the ends of the lamp gently down to the right
position, and make sure the lamp has been fixed well to the position.
5. And then push the back-holder with the fixed lamp gently into the reflector, observing the lamp after
finising, and plug in the windproof fan.
lamp cover
Dismantle cover
Dismantle lamp cover
Fit the light bulb
