QuikRuler III 17
Setting the Counting Scale
You can use QuikRuler’s
function to count areas or other components on your
drawing. For example, if you are using QuikRuler III to estimate how much electrical wiring will
be required for a building, you could use the
function to count how many electrical
outlets will be needed. Normally, QuikRuler III counts by ones. However, you can change the
scale to something else using the
function. For example, you can use the
function to tell QuikRuler III to count by fives, tens or some other value – even
fractions.
Change the Counting Scale
1.
Click on the
button to activate the
Count Scale
function.
QuikRuler displays the current counting scale under the flashing cursor.
2.
Select the appropriate number on the QuikRuler Menu. For example, click on the
and
buttons if you want to count by tens.
3.
Click on the
button to save your setting, or choose another option or function to
save your setting and activate the selected function.
Measurements
The following sections can describe how to use QuikRuler III to measure the components of
your drawing.
