Giraud Tool Company, Inc.
GIRAUD POWERED CASE TRIMMER
Page 9 of 10
Special calibers not listed on the front of this bulletin can be accommodated most
times, call or email for specific calibers. Additionally, blank case holders are
available for wildcat users that have access to chamber reamer for their specific
caliber. These are available, complete with detailed instructions and drawings
from GTC.
Case holders for neck sized only cases are available by special order. You must
send me three neck sized cases to be used with the trimmer so I can fit a case
holder to your brass. Contact GTC for further details if interested.
Problems or Questions
Good luck with your trimmer and shoot all
X
s. If you have any problems with this
trimmer or questions about operation, call me or drop me an email and I will be
glad to help you. Together we will make your trimmer right and make sure you
are using it in the most beneficial way possible. My email address is
[email protected], if you can't reach me there; call me directly at 713-907-
2695 after 6pm CST.
Doug Giraud
Giraud Tool Company, Inc.
3803 Dawn Lane
Richmond, Texas 77406
713-907-2695
Figure 12 -
Freshly trimmed case mouth showing proper inside and
outside chamfers.
To order additional parts
or accessories, please
call
281-238-0844
during
weekday daytime hours
(9-5 CST, M-F).
