www.globetechinnovations.com
14
on, release the button until the LED turns off. This indicates
that all the remote controls have been erased completely, if you
change another manufactory code transmitter must erase first.
Verify open direction: If the gate does not move in the desired
direction, then you will need to reverse the motor operating
direction, open the black plastic cover, you can do this by
exchanging wires
‘MOT1’ and ‘MOT2’, ‘Open limit(13 of J5)’ and
‘Close limit(11 of J5)’.
8. Programming Process
Adjust the DIP switch
（
see Fig13B and table 1
）
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
Fig. 13A Fig.13B
