User Manual
7100 Low Flyer
-I
GTM- 7100-MAN-001 (2) Page 6 of 11
1.
Included in the installation kit:
(A) Two handrims
(B) 6 off M5 pan hex head stainless-steel bolts.
(C)
6 off M5 self-locking stainless-steel nuts
(D)
6 off shimming washers as required
2.
Tools required (not included):
a.
5 mm Alan key
b.
5-20 Nm torque wrench
c.
Feeler gauge
3.
Trial fit the hand rim to the wheel rim:
a. Fit the hand rim to the wheel, ensure that all the tabs slide freely into
position without any interference as shown in Figure 1. Should you
require any force to position the hand rim, stop immediately and
consult your authorized dealer.
Figure 1: Checking for interference of the hand rim tabs
b.
Check that the tab holes align with the mounting holes on the
wheel. Ensure that the bolts fit without being forced. If one or more
holes are not aligned, do not proceed and consult your authorized
dealer immediately.
Do not
drill the holes bigger
.
Hand Rim Installation
√
WARNING
