ABOUT THE REMOTE:
• The Remote (Part B) uses an Infrared Signal to change the color of
the tape light via the receiver node on the RGBW Control Box (Part D).
The Remote will only work in line-of-site of the receiver node on the
Control Box
• Please note that the RGB (Upper Section) and Warm White
(Middle Section) control different LED chips on the product.
They can be used simultaneously or independently. Choose one
Warm White light setting and/or one RGB Color setting for the
perfect lighting mix desired.
• ON/OFF buttons and Brightness buttons correspond to their
individual sections of LEDs for your convenience.
• Lighting Effects apply to both sections simultaneously.
This product is guaranteed against failure due to factory defects in
materials or workmanship for one (1) year from the date of purchase.
This warranty is non-transferable and applies only to the original owner.
Proof of purchase required for repair or replacement. This warranty does
not cover normal wear of parts or damage resulting from any misuse of
the product. Misuse of the product includes but is not limited to: using in
extreme weather conditions, opening the housing of the product, or
attempted remodel/alterations made to product.
Assembly & Installation: GT-LTP-3 | 16ft LED Color Tape Light
PAGE 4
