4. Using strong scissors or other cutters, cut directly along the chosen cutting line on the
tape light. A clean cut will insure prolonged life of the product.
5. Once cut, the tape can be connected to another section of tape light using provided
connectors (Part F or Part G) in this pack to achieve desired length for your space.
•
(Part F) Should be used in instances where a straight connection is needed.
•
(Part G) Should be used where there is a large corner, bend, or other obstacle.
• The extension section of tape should be measured from the end of the spool
(the side without the five-prong plug) and connected while aligned with the RGBW
markings matching the RGBW marks on the extending tape. (Figure 2)
• Test to make sure this connection works before hanging the lights.
6. For best results with 3M® tape, do not remove or reposition the tape once the
adhesive is placed onto the mounting surface. For best results, wait 24 hours before
using the light to let the adhesive cure. It is recommended to use guide marks to plan
the path of your tape light to get it positioned correctly the first time.
• If necessary, use screws and mounting brackets. (Part E, Optional.)
7. Connect the 5-pin connector on tape light (A) to 5-pin receptor on the Control Box (D).
8. Connect the Control Box (D) to the Power Supply (C). Plug Power Supply into outlet.
9. Using Color Remote (B), turn to back side and release battery compartment cover.
10. Remove the plastic protector tag from the battery compartment of Remote (B).
11. Check to make sure the Lithium Metal CR2025 battery is in place and slide closed.
12. Aim Color Remote (B) towards the RGBW Control Box (D) and Power ON tape light.
• SEE PAGE 4 FOR MORE REMOTE INFORMATION.
13. Change to desired settings and enjoy!
14. Turn OFF light when no longer in use.
INSTALLATION INSTRUCTIONS CONTINUED:
DO NOT look directly at LED
lights for any length of time!
EYES
Assembly & Installation: GT-LTP-3 | 16ft LED Color Tape Light
PAGE 3
