Fig. 4
Note: after replacing the battery, test the
smoke detector by pressing the button to
ensure that it is able to operate normally.
4. After the smoke detector has been in
operation for a long period or
it’s installed before
completion of the construction, the smoke
detector may have dirt build-up in the chamber,
which could cause false alarm. In case of this,
contact local distributor for technical support. If
the reason is accumulative dust, return the
smoke detector for cleaning.
5. If the smoke detector
gives short “chirp”
sound and visual indication, this means
sensitivity is low and the smoke detector is not
working properly. Please do not try to repair it
by yourselves. This will void your warranty.
See “Return a Smoke detector” for instructions
to return the smoke detector. Or you can inform
local distributor or agent. We will respond as
soon as possible.
6. I
t’s recommended to replace the smoke
detector for every 10 years.
Warnings:
Dust cove
r can’t be removed until the
project is plunged. Protect the dust cover
for the future use. Dust cover provides
limited protection against airborne dust
particles. So, remove the smoke detector
prior to heavy remodeling or construction
and inform the proper authority.
Never use any kinds of open flames to
test your smoke detector. You may
ignite and damage the smoke detector
as well as catching a fire. The test
button
is
designed
to
accurately
simulate smoke conditions and test the
smoke detectors functions as required
by relative standard.
Don
’t cover, paste, or block the
openings of a smoke detector. Those
openings are used for ventilation to
sample the air around.
Dust covers are an effective way to limit the
entry of dust into smoke detector sensing
chambers.
However,
they
may
not
completely prevent airborne dust particles
from
entering
the
smoke
detector.
Therefore, we recommend the removal of
smoke detectors before construction or
other dust producing activity begin. Be sure
to notify the proper authority for the
removal of the smoke detectors.
A false alarm will be given if the smoke
detector is not clearned regularly. If dust
is build-up, the smoke detector may
give the alarm without fire.
When fire test is made, output switch
signal will caused the connected device
to give alarming sound. Please isolate
such devices to avoid false alarm.
7. Return a Smoke detector
Should you experience problems, please follow
the steps to return the faulty smoke detectors.
7.1 Remove the smoke detector and take out
the battery.
7.2 Carefully pack (the manufacturer cannot be
responsible for consequential damage) and
return to the manufacturer (or local
distributor and agent). Please attach
complete details as to exact nature of
difficulties being experienced and date of
installation.
Gulf Security Technology Co., Ltd.
No. 80, Changjiang East Road, QETDZ,
Qinhuangdao, Hebei,
P. R. China 066004
Tel: +86 (0) 335 8502434
Fax: +86 (0) 335 8502532
30309819
