30304559
Issue 2.01
commission and kept well before installation, taken
corresponding measures for dust-proof, damp-proof
and corrosion-proof.
2. The dust cover cannot be removed until the project
has been plunged into usage. Otherwise it can’t alarm
normally.
3. Clean the detector at least once a year to ensure
normal operation of the system.
4. Before cleaning, notify the proper authorities that
the system is undergoing maintenance and will
temporarily be out of service. Disable the zone or
system undergoing maintenance to avoid unwanted
alarms.
5. The detector should be tested again after cleaning
and reinstallation.
6. Protect the metal component on the PCB against
damp and improper distortion.
7. Fire simulation test should be made to the detector
at least once half a year.
Specification
Operating Voltage
Loop 24V
Standby Current
≤
0.8mA
Alarm Current
≤
5mA
Fire LED
Red, Flashes in polling, and
illuminates in alarming.
Remote indicator
output
Directly connect to remote
indicator (built in 5.1k resistor in
series, output voltage is 4.3V);
not lit in polling, constantly
illuminated in alarming.
Sensitivity I: 58
℃
Sensitivity II: 66
℃
Action Temperature
Sensitivity III: 72
℃
Response Velocity
3
/min
℃
Programming
Electronically addressed.
Programming Range
Occupying one address within
1
～
242.
Ingress Protection
Rating
IP22
Environmental
Temperature
-
10
℃
～+
50
℃
Relative Humidity
≤
95%, non-condensing
Material and Color of
Enclosure
ABS, white (RAL 9016)
Dimension
Diameter: 100mm
Height: 41mm (without base)
Mounting Hole
Distance
45mm
～
75mm
Weight About
90g
Accessories and Tools
Mode Name
Remark
P-9910B
Hand Held
Programmer
Supplied separately
DB-01 Orientation
Base
Supplied separately
Limited Warranty
GST
warrants that the product will be free from defects
in design, materials and workmanship during the
warranty period. This warranty shall not apply to any
product that is found to have been improperly installed
or used in any way not in accordance with the
instructions supplied with the product. Anybody,
including the agents, distributors or employees, is not
in the position to amend the contents of this warranty.
Please contact your local distributor for products not
covered by this warranty.
GST China
Gulf Security Technology Co., Ltd.
No. 80, Changjiang East Road,
QETDZ, Qinhuangdao, Hebei,
P. R. China 066004
Tel: +86 (0) 335 8502528
Fax: +86 (0) 335 8508942
[email protected]
www.gst.com.cn
GST UK
Global System Technology PLC
Lion Court, Staunton Harold Hall,
Melbourne Road, Ashby de la Zouch,
Leicestershire, England LE65 1RT
Tel: +44 1283 225 478
Fax: +44 1283 220 690
[email protected]
www.gst.uk.com
GST Dubai
Global System Technology PLC
PO Box 17998 Unit ZA04
JEBEL ALI Free Zone,
Dubai, UAE
Tel: +971 (0) 4 8833050
Fax: +971 (0) 4 8833053
[email protected]
www.gst.uk.com
This document is subject to change without notice. Please contact GST for more information or questions.
E-MAIL: [email protected]
