- 11 -
STP 500
3.3 C
onneCting
the
deviCe
P
ower
s
uPPly
• Connect the attached mains cable to the IEC connectors C14
3
.
• Connect the mains cable to mains socket with protective conductor connec-
tion. Thereby note the voltage specified on the device.
—> This device has no primary power switch and is in standby mode im-
mediately after connecting the operating voltage. Power ON/OFF
1
switches only the secondary DC voltages!
For a complete disconnection from the mains, the mains plug must
be pulled out of the mains socket. Ensure that the mains plug can be
pulled out without difficulties.
s
trea ming
i
nterfaCe
• Configure the device (page 12).
• Make sure the LAN network is adapted and configured for streaming!
Therefore note menu
Help > Multicast Setup
.
•
If the programming is finished
connect the streaming interface
7
to the
LAN network via a CAT 6 cable.
C
onfigur ation
/wan i
nterfaCe
• After the initial configuration, connect the configuration/WAN interface
6
to the LAN network using a CAT-6 cable if you want to process content from
the Internet or have remote access.