GSS STIM 1916 CT, Инструкция по сборке

Страница: 27 / 45

- 27 - STIM 1916 CT
228
In the
Output Multiplex
column, select the
output line
via which the cor-
responding service is to be output.
With the first check box below the output line number you can activate/
deactivate all check boxes of the output line for the corresponding input
line.
—> The
highlighted colour
of the output line number displays:
Output off (menu Output
151
page 22)
free = no services assigned.
Transparent mode = Input data stream is output on one output
line; no additional services from other sources (no Multiplex);
services can be filtered out;
—>
Unknown PIDs are output
.
Multiplex mode = Selected services are output on one line with
additional services from other sources (multiplex) or on multiple
lines.
—>
Unknown PIDs are NOT output
.
Data overflow; a data overflow after changes in the table can-
not be displayed until the changes have been saved with
button.
—> Make sure not to exceed the maximum data rate/output line
(
222
max) which is depending on the modulation settings in the
menu Output!
229
Here you can reset the settings of the Output Multiplex column (all check
boxes off ).
230
Here you can delete the entries in the New SID column for all input lines
or a selected line.
231
Before leaving the menu, changes must be transferred to the head-end
station!
• Therefore click on button .
—> After that is displayed for a short time in the upper right corner.