- 24 -
STI 1932 CT
108
Herein you can perform a quick setup for columns
100
up to
103
.
Quick Setup:
—> By entering "Line - from - to" you can select the lines for which you
want to make changes. If you do not enter a value, programming
is carried out from line 1 to line 32, but only for those columns for
which you have entered changes.
—> If you set a check mark at "Input change", the corresponding inputs
are switched on or off depending on selection
/
.
You can delete the contents of column "Name" when selecting "re-
set".
Via the button "Redundant input
/
" you can select for
all lines whether the "normal" or the "redundant" input signal ® is
to be used as the main signal.
In the "Start IP" field, you can enter the output IP address for the first
row. This address is then increased by 1 in each additional row –
depending on the " redundancy input" check box, either for the
"normal" or the "redundant" inputs.
An Entry in field "Port" is transferred to all fields in the column –
depending on the " redundancy input" check box, either for the
"normal" or the "redundant" inputs..
• Click on "accept", check the information and confirm with "OK".
110
Before leaving the menu, changes must be transferred to the head-end
station!
• Therefore click on button
.
—> After that
is displayed for a short time in the upper right corner.
