- 7 -
- 7 -
Note:
Slots 1 (digital module) and 2 (modulator module) are shown in the illustra-
tion. The open slots in between (without a contact strip on the board at the
rear wall of the housing) are intended for add-on modules.
• Insert the digital module in grooves
A
and
B
of an open slot (with contact
strip on the board at the rear wall of the housing) next to the associated
modulator module.
• Gently slide the digital module into the head-end station and ensure that
it makes contact with the contact strip on the board at the rear wall of the
housing.
