manualshive.com logo in svg

GSS PTIS, Руководство по сборке, Страница: 25 / 36

Поделиться
Скачать
GSS PTIS Скачать руководство пользователя страница 25

- 25 -

- 25 -

Setting the port number
• Press the 

▶

 

 button to position the cursor under the port 

number e.g. ”

 1234

”.

• Use the 

▶

 

◀

 

/ 

 buttons to position the cursor under the 

digit of the port number displayed to be set.

• Using the 

 buttons set the port number wished 

 (”

0

” … ”

65535

”).

Copying the settings to all IP addresses

• Pressing the 

 button the settings ”Switching the IP 

address off or on”, ”Selecting the transmission protocol” 
and ”Setting the port number” can be copied to all IP ad-
dresses.

—>  The display shows ”

copy

” for a short time.

• Press the 

 button.

—>  The “Defining the quantity of data packets”, ”Setting 

the forward error correction” and ”Setting the trans-
mission channel” – “

PKTS / FEC

” menu is activated.

Defining the quantity of data packets
Setting the forward error correction
Setting the transmission channel

In this menu you set the quantity of the data packets to be 
transmitted, the forward error correction FEC and the trans-
mission channel. If the forward error correction is used the 
data to be transmitted is encoded in a redundant way so that 
the addressee can correct transmission errors.

IP 1

7 off

PKTS / FEC

Å

 

Ï

/

off / 10/9 … 20/19
Annex A / Annex B
copy

1 … 7

Содержание PTIS





































Отзывы:

Нет отзывов