- 21 -
PHDQ 8008 TSR
Setting the input symbol rate
Setting the DVB mode
The symbol rates of the satellite transponders can be found in the current chan-
nel table of the satellite operator, in various satellite magazines and in the
Internet.
The cassette recognizes the transmitted DVB mode and switches over between
the normal QPSK mode (DVB-S) and the DVB-S2 mode. Receiving stations
with DVB-S2 mode, we suggest to preset the DVB mode to shorten the time for
searching stations.
Bx 4A
27500
SYMBOL
DVB-S
Setting the input symbol rate
• Use
to position the cursor under the digits to be set for the symbol
rate displayed.
• Press
to enter the values of the symbol rate.
Setting the DVB mode
• Use the
button to place the cursor under "
DVB-S
" and set the required
DVB-S2-mode with the
buttons.
• Press the
button.
—> The "Setting the input frequency" – "
FREQ
" menu is activated.
Setting the input frequency
If three dots "
…
" appear in the second line of the display, the cassette is in
the "
station search
" mode. Please wait until the process has finished.
Once the HF receiver has synchronised to the input signal, any offset to the
target frequency is displayed in MHz, e.g. "
– 1.8
".
If a question mark "
?
" appears in the second line of the display, there is no
input signal present. Check the configuration of the antenna system and head-
end station as well as the preceding settings of the cassette.
Bx 4A
11835 -0.6
FREQ
CN 15
Bx 4A
15.0 dB
C/N
(+ 11.0) OK
