- 10 -
PHDQ 8008 TSR
• Insert the required number of cable terminals in the openings provided in
the head-end station or in the 19
"
cabinet.
—> C
a
ble terminals are not included in the scope of delivery.
Tighten the nuts of the cable terminals until the teeth on the lock washers put un-
der have penetrated the exterior coating and a good connection is made between
the housing / 19" cabinet and cable terminals.
3.3 Connecting the cassette
RS 232
7
6
3
ASI output
5
SAT input "A"
2
ASI
input
4
SAT input "B"
1
•
Connect the SAT input cables to the sockets "
SAT input A
"
2
(channel strip
"A") and "
SAT input B
"
1
(channel strip "B").
• Connect the ASI sockets
4
and
5
.
•
Connect the head-end station to the mains power supply.
7
"
RS 232
"socket
The operating software of the cassette can be updated via the 9-Pin D-
SUB socket "RS 232" using a PC or laptop and the software "
BE-Flash
".
You can find the current operating software and the software "
BE-Flash
"
on the website "
www.gss.de
".
The LAN socket
3
and the slot for a CA module
6
are without function.
