- 21 -
PHDQ 8008 TSR
a
djusting
the
outPut
levels
of
the
Channel
striPs
This menu item is used to set the output levels of the modulators of the channel
strips "
A
" and "
B
" to the same value.
Bx 4A
-3 dB
LEVEL
• Measure and note down the output level of the channel strip.
• By repeatedly pressing the
button scroll back to the "Selecting the
channel strip" menu.
• Select the other channel strip (page 19) and set the following menu items:
• "Channel / frequency setting", page 19
• "Output channel" or "Output frequency", page 19
• Switch on the modulator if necessary, page 20
• Measure and note down the output level.
• Activate the "
LEVEL
" menu of the channel strip with the higher output level.
• By pressing
adjust the higher output level of one channel strip to
the lower output level of the other channel strip incrementally from "
0
" to
"
–10 dB
".
• Press the
button.
—> The "LNB oscillator frequency" – "
LNB
" menu is activated.
lnb
osCill ator
frequenCy
Set the oscillator frequency of the LNB used in this menu.
Bx 4A
10600 MHz
LNB
• Use
to place the cursor under the digits of the frequency display to
be set.
• Press
to enter the oscillator frequency of the LNB used.
• Press the
button.
—> The "Input symbol rate" – "
SYMBOL
" menu is activated.
Содержание PHDQ 8008 TSR
Страница 1: ...Assembly Instruction PHDQ 8008 TSR ...
