GSS HMPT 1000 C, Инструкция по сборке

Страница: 40 / 49

- 40 - HMPT 1000 C
f
aCtory reset
In this menu you can reset all settings to the factory defaults.
M
Å
Bx 4A
Defaults FACTORY
=>
Bx 4A
STORE
FACTORY
=> M
• Press the button.
—> The factory defaults are invoked (" FACTORY STORE ").
—> By pressing the button, you will be returned to the menu
item "Channel strip" without invoking the factory defaults (page 27).
• Press the button.
—> The factory defaults are saved. The display shows "STORE"
—> Back to "Selecting the cassette" (page 22).
—> By pressing the
button, you will be returned to the menu
item "Channel strip" without saving the factory defaults (page 27).
—> If necessary set channel strip " B ".
s
aving set tings
• Press the button.
—> The settings are saved.
—> You will be returned to the menu item "Selecting the cassette" (page 22).
—> If functions of the TPS module are activated, their status is shown in
the second line of the display:
" M " – Station filter is switched on.
" N " – NIT is activated.
" C " – Network/operator identification CAT is activated.
—> If necessary set channel strip " B ".