GSS HMPT 1000 C, Инструкция по сборке

Страница: 25 / 49

- 25 - HMPT 1000 C
• Use the buttons to place the cursor under the digit of the port number
displayed to be set and use to set the port number wished (" 0 " …
"
65535
").
• Press the button.
—> The "Input signal path" – " INROUTE " menu is activated.
i
nPut signal Path
In this menu you define the signal path of the input transport streams.
Menu setting " A = 1 B = 2 " (page 7).
Menu setting " A+B = 1 2 = OFF " (page 7).
Bx 4
A=1 INROUTE
B=2
• Use the buttons to select the signal path wished.
• Press the button.
—> The "Output signal path" – " OUTROUTE " menu is activated.
o
utPut signal Path
In this menu you define the signal path of the output transport streams.
Menu setting " 1 => MA 2 => MB " (page 8).
Menu setting " 1 => ASI MA => OFF " (page 8).
Menu setting " 2 => ASI MB => OFF " (page 8).
Bx 4
1=>MA OUTROUTE
2=>MB
• Use the buttons to select the signal path wished.
• If you do not want to do ASI settings, press the button.
—> The "Channel strip" – " LINE " menu is activated (page 27).