GSS HDTV 1000 T, Руководство по сборке

Страница: 31 / 48

- 31 - HDTV 1000 T / HDTV 1001 T
Test the status of the individual stations:
Ê vÊÌ iÊvˆÌiÀʈÃÊÃ܈ÌV i`ʜ˜]Ê«ÀiÃÃÊÌ i button. In this mode you can test the set-
tings of the station filters again or change them if necessary.
Ê UÊ ˜ÊÌ iʺ PROGRAM Filter on ” menu the station filters switched on can be
switched “ off ” using the buttons if necessary.
—> By pressing the button you will be returned to the ”Setting the
input frequency” menu (page 27).
Menu setting ” A+ASI = 1 B+ASI = 2 ”
” A+ASI = 1 A+ASI = 2 ”.
Channel strip “ A ”
Bx 4A
Filter
PROGRAM
off
01/10 Bx 4A TV +
Das Erste
Å Ï
/
02/19 ASI TV +
ORF2
Å Ï
/
on / off
PROGRAM
on
Bx 4A
Filter
Å
AUDIO
"
Ê UÊ -iÌÊÌ iÊV >˜˜iÊÃÌÀˆ«Êº A ” or “ B ”.
—> The setting of the channel strips “ A ” and “ B ” is identical and follows the
description above.
Ê UÊ *ÀiÃÃÊÌ iÊ button.
—> The “Setting the output signal” – “ COFDM-MODE ” menu is activated
when the channel strips “ A ” without a CA module installed and “ B ” are
programmed. Please take note of the tables below before setting the
COFDM parameters.
—> Programming the channel strip “ A ” with a CA module installed the set-
tings for the CA module are activated (see page 43).