- 23 -
HDTV 1000 SPTS
—> The "Input data stream" – "
INPUT
" menu is activated when the input
signal source "
Tuner A
" without a CA module installed and "
Tuner
B
Programming the input signal source "
Tuner A
" with a CA module
installed the "PID monitoring" – "
CA
" menu is activated (page 32).
• Use the
buttons to select further input signal sources ("
Tuner B
" /
"
ASI
") and program them.
• Press the
button.
—> The "Allocating the IP addresses" – "
IP-OUT 1
" menu is activated.
a
lloCating
the
iP
addresses
In this menu up to 16 services that are contained in the data streams of the in-
put source signals ("
Tuner A
", "
Tuner B
", "
ASI
") can be accessed. The services
detected receive an IP address automatically.
In the following sub-menus you can set specific parameters for each service.
Bx 4
off
IP-OUT 1
=>
• Press the
buttons to select the IP outputs to be set ("
IP-OUT 1
" …
"
IP-OUT 16
").
—> In the second line of the display the service is indicated allocated to
the IP output (e.g. "
Das Erste
").
• Press the
button.
—> The "Switching the IP address off or on, Transmission protocol, Port
number" – "
MODE / PORT
" menu is activated.
