- 32 -
HDTV 1000 S
s
et ting
the
iP
addresses
for
the
outPuts
In this menu you set the IP address for the IP output selected.
—>
"IPTV" IP addresses (menu IP-OUT), which are used to send and re-
ceive the IPTV channels (e.g. 227.40.50.x) must be within the "mul-
ticast" range from 224.5.0.0 to 231.255.255.255.
The software allows to allocate the IP addresses to the further outputs automati-
cally in ascending order.
IP 1
227. 40. 50. 1
OUT-IP
If an already used IP address (in the cassette) is selected, an exclamation mark
"
!
" appears in the first line of the display beside the number of the IP output.
IP 1 !
227. 40. 50. 1
OUT-IP
Allocating IP addresses to the outputs manually
• Press the
buttons to position the cursor under the digit of the IP ad-
dress to be set.
• Using the
buttons set the IP address wished.
Allocating IP addresses to the outputs automatically
• Pressing the
button the following outputs are allocated with IP ad-
dresses in ascending order, starting from the IP address set.
—> The display shows "
auto
" for a short time.
• Press the
button.
—> The "Switching the IP address off or on, selecting the transmission
protocol, setting the port number" – "
MODE / PORT
" menu is acti-
vated.
