- 22 -
HDTV 1000 S
5.4 u
Ploading
the
station
tables
to
the
Casset tes
To upload the station tables to the cassettes the software "HotelTransponder.
exe" is needed. It can be downloaded from:
http://212.20.172.90/Kopfstation/CD/Software/Hotel/HotelTransponder.exe
—> Your PC must be connected to the cassettes via LAN (within the same
IP address range as used for connecting the cassettes, page 25).
• Store the text file, for example, under the name "config.txt".
• Start the software "HotelTransponder.exe" by using the following string in
the command line:
HotelTransponder.exe config.txt 1 60000 –O
HotelTransponder.exe
starts the software
config.txt
selects the text file
1
sets the default receiving table (for example table
1; the first table in the text file).
60000
sets the port. This port must be identical with the
port set in the UDP port setting (page 27).
–O
textfile is also uploaded to the transmitter cas-
settes. If the text file shall be uploaded only to the
receiver cassettes, "-O" must not be used in the
string.
—> The software starts and loads the station tables included in the text
file to the corresponding cassettes.
—> The order of the cassettes is defined by the order of the hardware IP
addresses which are assigned to the cassettes manually.
